Télécharger Imprimer la page

Ruggerini MD 150 Emploi-Entretien page 30

Masquer les pouces Voir aussi pour MD 150:

Publicité

WARNING SIGNS
• Ruggerini engines are built to provide safe and
longlasting performances, but in order to obtain
these results it is essential that the maintenance
requirements described in the manual are
observed
along
with
the
recommendations.
• The engine has been built to the specifications of
a
machine
manufacturer,
responsibility to ensure that all necessary action
is taken to meet the essential and legally
prescribed health and safety requirements. Any
use of the machine other than that described
cannot be considered as complying with its
intended purpose as specified by Lombardini,
which therefore declines all responsibility for
accidents caused by such operations.
• The following instructions are intended for the
user of the machine in order to reduce or
eliminate risks, especially those concerning the
operation and standard maintenance of the
engine.
• The user should read these instructions carefully
and get to know the operations described. By
not doing so he may place at risk his own health
and safety and that of anyone else in the vicinity
of the machine.
• The engine may be used or mounted on a
machine only by personnel suitably trained in its
operation and aware of the dangers involved.
This is particularly true for standard and, above
all, special maintenance work.
maintenance
contact
3 0
DANGER
By not respecting these directions the user may place at
risk persons and objects.
specifically by Ruggerini. This work should be
carried
literature.
Lombardini
accidents or for failure to comply with the
following
safety
requirements of law if changes are made to the
engine's functional parameters or to the fuel
flow rate adjustments and speed of rotation, if
and
it
is
his
seals are removed, or if parts not described in
the operating and maintenance manual are
removed and reassembled by unauthorized
personnel.
• In addition to all other machine specifications,
ensure that the engine is in a near horizontal
position when starting. lf starting manually,
ensure that the necessary operations can be
performed without any risk of striking against
walls or dangerous objects.
(except for recoil rope starting) is not permitted
even in emergencies.
• Check that the machine is stable so that there is
no risk of it overturning.
• Get to know the engine speed adjustment and
machine stop operations.
• Do not start the machine in closed or poorly
ventilated
combustion
monoxide, an odourless and highly toxic gas,
so spending too long a time in an environment
where the engine discharges its exhaust
products
For special
consciousness and even death.
personnel
trained
SAFETY INSTRUCTIONS
out
in
accordance
with
declines
all
responsibility
Rope starting
environments.
The
process
generates
freely
can
lead
to
CAUTION
By not respecting these directions the user can cause technical
damage to the unit and/or to the installation.
• The engine may not be used in environments
existing
containing
flammable
atmospheres or easily combustible powders,
for
unless adequate and specific precautions have
been taken and are clearly stated and certified
for the machine.
• To prevent the risk of fire, keep the machine at a
distance of at least one metre from buildings or
other machines.
• Children and animals must be kept at a sufficient
distance from the machine to prevent any danger
resulting from its operation.
• Fuel is flammable, so the tank must be filled only
when the engine is turned off. Dry carefully any
fuel that may have spilled, remove the fuel
container and any cloths soaked in fuel or oil,
check that any sound-absorbing panels made of
porous material are not soaked with fuel or oil,
and make sure that the ground on which the
machine is located has not absorbed fuel or oil.
• To start the engine follow the specific instructions
provided in the engine and/or machine operating
manual. Do not use auxiliary starting devices not
originally installed on the machine (e.g. Startpilot
systems which utilise ether etc.)
• Before starting, remove any tools that have been
internal
carbon
used for carrying out maintenance work to the
engine and/or the machine and check that any
guards removed have been replaced. In cold
climates it is possible to mix kerosene with the
loss
of
diesel fuel to make the engine easier to start. The
materials,
explosive

Publicité

loading

Ce manuel est également adapté pour:

Md 190Md 190 e