Publicité
Les langues disponibles
Les langues disponibles
LIFTING
Make sure that the lift is completely lowered.
•
Use the lift truck to move the platform to the vehicle to be lifted. Make sure that the lifting column
•
is in a vertical position and that it does not hit the vehicle.
•
Position the support arms under the vehicle.
Adjust the arms so that the rubber pads can touch the vehicle manufacturer's recommended lifting
•
points on the vehicle.
•
Turn on the power switch.
•
Raise the platform by pressing the lifiting button until the arms touch the underside of the vehicle.
Make sure the vehicle is secured.
•
Keep pressing the Lift button until you reach the height you want.
•
PARKING
•
Press the safety button to activate the mechanical safety precautions.
•
Always ensure that safety precautions are in place before working on or near the vehicle.
LOWERING
•
Lower the vehicle by pressing the lowering button: the lift needs a few seconds to release the
safety catch and then starts the lowering process.
Lower the platform by pressing the lowering button to the safety height.
•
•
Make sure that the safety area is free of people and objects.
•
Keep pressing the lowering button until the lift is fully lowered.
Close the power switch with a padlock.
•
Move the lift out of the work area. Be careful not to hit the vehicle.
•
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-09
Manufacturer ATH-Heinl GmbH & CO.KG
- 7 -
Publicité
