LaserLiner PocketCross-Laser 2G Mode D'emploi page 13

1
Use of lithium-ion rechargeable battery
– Use the power supply/charger unit only in
closed rooms; do not expose to moisture
or rain otherwise risk of electric shock.
– Ensure the device's battery is fully charged
before using the device.
– Connect the power pack/charger to the mains
power supply and the socket on the device's
battery pack. Please only use the power pack/
charger supplied. Using any other power
pack/charger will invalidate the warranty.
– The LED display flashes while the device is
charging. Charging is complete when the
LEDs are continuously lit.
!
The device has a replaceable battery. Contact your distributor
or the UMAREX-LASERLINER service department.
2
Horizontal and vertical levelling
Release the transport restraint, push the slide switch (2) to the right.
The laser cross will appear. The laser lines can be switched individually
with the selection button.
LASER LASER LASER
PocketCross-Laser 2G
LASER
USB-C
13
EN