Cleaning And Maintenance; Technical Data - Adler europe AD 7738 Mode D'emploi

remove the battery, simply squeeze the small tab and pull. Insert 1 x CR2025 (3V) lithium battery into the small crevice as illustrated
(picture 3).
IMPORTANT: The + symbol on the battery inserted should be facing upwards. Firmly close the battery compartment to begin using the
Remote Control (4).
TIMER FUNCTION:
The timer allows you to set the length of time from 1-12 hours. Set time is counted down to switch off the device automatically. To use the
timer, press the timer button (D). Each one pressing of the button increases the time set by 1 hour. The amount of time set will be displayed
on the digital display (F), and will displayed in 1 hour distances. If the timer has been set for 12 hours (MAX amount of time) pressing the
button once more will reset the Timer Function.
OSCILLATION FUNCTION:
Press the oscillation button (E) to turn on the oscillation function. The device starts to swing left and right side in range of 50 degree to
provide wider air stream in room. Press the oscillation button (E) again to turn off the oscillation function.
TEMPERATURE SETTING:
By pressing buttons (C) set up desired temperature in room.
1. The temperature range is available from 15 to 40 degrees of Celsius. Press the button (C) again and again until you reach the
temperature level you want in the room. For first use time the default temperature is set on 25 degrees of Celsius. One the button (C)
pressing causes one degree change.
2. The device automatically set up the heating power:
- it is working on high heating power 2000W if the set temperature is 4 degree higher than the present temperature in room.
- it is working on low heating power 1400W if the set temperature is 2-3 degree higher than the present temperature in room.
- it is working on fan mode if the set temperature is +/- 1 degree different than the present temperature in room.
WARNING: During use, do not touch or cover the air inlet and air outlet.
BUTTON LOCK FUNCTION: 3 seconds continuous pressing together timer button (D) + temperature button (C), it protects against not
intentional setting change.
Buttons unlocking: 3 seconds continuous pressing together timer button (D) + temperature button (C) again, the key lock function will be
off, the device is ready for use again.
DISPLAY BLANKING FUNCTION: 3 seconds continuous pressing the oscillation button (E) causes blanking of the control panel (1).
Pressing any key will wake up the display again.
SAFERTY PROTECTION
1. OVERHEAT PROTECTION: This device is fitted with a safety overheat protection device. If overheating occurs, ensure the power switch
(5) is off and turn off the power supply. Unplug the device and let it cool down for 30 minutes. If something is obstructing air flow grids (2
and 3), ensure the object is removed. After 30 minutes has passed, turn the device on again as described above.
2. TIP-OVER SWITCH: The device will only work on a firm stable surface. If the device is not 100% stable, located at not vertical position
or it falled down, the device will switch off until placed in the correct position.

CLEANING AND MAINTENANCE

1. Make sure the device is not hot.
2. Before cleaning the device remove the plug from the electrical socket.
3. Keep the air inlet (2) and outlet (3) openings clean. Do not allow dust to collect on the openings.
4. Clean the housing using only dry or moist cloth.
5. Do not immerse the device in water!

TECHNICAL DATA

Voltage: 220-240V ~50-60 Hz
Power: 2000W
Battery: 1 x CR2025 (3V) lithium battery not included
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance
should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this
appliance in the common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2.Das Gerät ist nur für den Hausgebrauch verwendet. Verwenden Sie es nicht für andere
Zwecke als den bestimmungsgemäßen Gebrauch.
3.Das Gerät ausschließlich an die Steckdose 220-240V ~50-60Hz anschließen. Es darf
nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden. Wegen
DEUTSCH
DIESE FÜR DIE ZUKUNFT AUF
8