SEVERIN WK 3418 Mode D'emploi page 14

Trouble shooting
Problem
Functions cannot be activated.
Water doesn't heat up, and beep
signals are heard.
Heating-up takes longer than expected.
Increased noise during heating.
Display shows continuous error code
E....
Should you be unable to solve the problem using the table, please contact our Customer Service. The contact data can be
found in the appendix to this manual.
Technical specifications
Device category, Art. no.
Voltage
Output
Capacity
Dimensions (W x H x D)
Weight
Special markings
14
Cause
Appliance is not plugged in.
Socket is defective.
Appliance is not placed on base
correctly.
Safety cut-out is activated.
The water container temperature
is higher than that selected.
Build-up of scale deposits.
Build-up of scale deposits.
Electrical fault in the appliance.
Digital water kettle
3418
220-240 V~, 50-60 Hz
2520 - 3000 W
0.5 – 1.7 l
24 x 24 x 14 mm
1.1 kg
Do not dispose of in domestic garbage
This product complies with all binding CE labelling directives.
Remedy
Connect appliance to mains.
Check the socket with a different
appliance.
Position it properly.
Appliance needs to cool down or be
descaled.
Select a higher temperature.
Descale the appliance (see Descaling).
Descale the appliance (see Descaling).
Contact our Customer Service.