Bosch CR 10 H Manuel D'installation page 23

Setting the ventilation level
▶ Turn the selector to select the desired ventilation level 0 (Off)
to 4.
Ventilation level 0: Damp proofing no longer guaranteed.
Setting the ventilation
▶ Press and turn the selector to choose the ventilation setting.
P1 Sleep timer mode: For example, the ventilation is operated for an
hour at the lowest level.
P4 Intensive ventilation: For example, the ventilation is operated for
30 minutes at the highest level.
A (Auto) time program
specified time program.
d (demand) controlled as needed: Ventilation level is regulated by
the measured humidity (CR 10 H) and, if necessary, via other air
quality sensors.
P5 Exhaust air bypass: Open the windows! Only the exhaust air fan
runs during exhaust air bypass.
1)
PP Party : For example, the ventilation is operated for 8 hours, at
the highest ventilation level.
1)
PF Flue Function
surplus supply air.
FIL Filter change: Confirm the filter change by pressing.
1) Only in conjunction with CW 400, HPC 410, CV 200
CR 10 H – 6720876740 (2017/08)
1)
: Ventilation level operates according to the
: The ventilation is operated for 7 minutes, with
Operating the appliance
Result
Result
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
°C
°F
23