Cequent Performance Products 51239 Instructions D'installation page 4

1a. Remove (4) bolts from the bottom of the impact structure. 1b. Remove plastic wire retainer on the outside of the drivers side
bumper channel, if it interferes with the hitch installation.
2. Raise hitch into position and install provided fasteners as shown. 3. Tighten all M14 CL10.9 fasteners with torque wrench to 100 Lb.-Ft. (136
N*M)
© 2014, 2015 Cequent™ Performance Products, Inc. - Printed in Mexico Sheet 4 of 12 51239NP 03-26-15 Rev. D