Spengler TENSONIC 527500 Manuel Utilisateur page 66

Warranty
66
The Tensonic
chase. If the Tensonic
poor workmanship, we will repair or replace it freely. The warranty does not cover
damages to your Tensonic
Please contact local retailer for details.
Electromagnetic Compatibility Information
The device satisfies the EMC requirements of the international standard IEC 60601-1-2.
The requirements are satisfied under the conditions described in the table below. The
device is an electrical medical product and is subject to special precautionary measures
with regard to EMC which must be published in the instructions for use. Portable and
mobile HF communications equipment can affect the device. Use of the unit in conjunc-
tion with non-approved accessories can affect the device negatively and alter the electro-
magnetic compatibility. The device should not be used directly adjacent to or between
other electrical equipment.
Table 1
Guidance and declaration of manufacturer-electromagnetic emissions
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of the device should assure that it is used in such an environment.
Emissions test
Radiated emission CISPR 11
Conducted emission CISPR
11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
www.spengler.fr
Blood Pressure Monitor is guaranteed for 3-years from the date of pur-
®
does not function properly due to defective components or
®
due to improper handling.
®
Compliance
Group 1, class B.
Group 1, class B.
Class A
Complies
Electromagnetic environment - guidance
The device uses RF energy only for its
internal function. Therefore, its emissions
are very low and are not likely to cause
any interference in nearby electronic
equipment.
The device is suitable for use in all
establishments, including domestic esta-
blishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.