Spengler TENSONIC 527500 Manuel Utilisateur page 55

Unit Operation
Memory Deletion
Memory for a selected group may be deleted while in Memory Check mode.
Press and hold the « SET » button for approximately 3 seconds to delete all
memory records from the selected group « Memory Clear » . And then transfer
into testing mode.
Press the « START/STOP » button to turn the unit off.
Note: Memory cannot be recovered once it has been deleted.
Low Battery Indicator
The unit will broadcast « Low Battery»when battery life is depleting and
unable to inflate cuff for testing. The «
approximately 5 seconds prior to shutting off. Replace batteries at this time.
No memory loss will occur throughout this process.
» appears simultaneously for
EN
55
www.spengler.fr