Spengler TENSONIC 527500 Manuel Utilisateur page 51

Unit Operation
Note: Unit will not function if residual air from previous testing is present
in cuff.
The LCD will flash «
2. Pressurization
Initial pressure is first pumped to 190mmHg. If the current user's systolic
blood pressure is over 190mmHg, the unit will automatically re-inflate to the
proper shelf.
Note: Pressurization will gradually subside and ultimately stop when
cuff is not properly applied to the arm. If this occurs, press "START/STOP"
button to turn the unit off.
» until pressure is stabilized.
ã ã e Ö =
L
EN
51
www.spengler.fr