Features And Controls - Murray Canadiana 1695941 Manuel De L'opérateur

A
B
Snowthrower Controls
SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to use one of six
(6) forward and two (2) reverse speeds (see Figure 8). To
shift, move speed select lever to desired position.
NOTICE: Do not move speed select lever while Traction
Control is engaged. This may result in severe damage
to the drive system.
B. Auger Control Lever — Used to engage and disengage the
auger and impeller. To engage push down, to disengage re-
lease.
en
E
G
C. Chute Rotation Crank — Used to rotate the discharge chute
to the left or right.
D. Deflector Control Wing Nut — Used to control the angle of
the chute deflector (up or down).
E. Traction Control Lever — Used to propel snowthrower for-
ward or reverse. Push down to engage, release to disengage.
F. Clean-Out Tool — Used to remove snow and debris from the
discharge chute and the auger housing.
G. Skid Shoe — Used to adjust the ground clearance of the
auger housing.

FEATURES AND CONTROLS

C
D
F
Figure 8
13