Counting Mode; Weight Control (Function Checkweigher); Operative; Types Of Weight Control - Giropes Baxtran BR 40 Manuel D'usager

6.4 COUNTING MODE

When the display shows the weight, press the key
The display will show
scroll across the various options: 10, 20, 50, 100, 200 and again to 10.
C
Press the key
puter will display the number of parts deposited on the platform.
If you want to use a container for deposit the parts to count, previously it must be weight .For this deposit the empty packaging on the platform
Charging
C
and press the key
Charging
C
Press the key

6.5 WEIGHT CONTROL (FUNCTION CHECKWEIGHER)

6.5.1 OPERATIVE

Check-weighing is a procedure to make ring an alarm to sound when the weight placed on the meet or exceed values stored in memory. The
memory holds values for a top limit and a low limit.

6.5.1.1 TYPES OF WEIGHT CONTROL

RANGE OF CONTROL:
Establishes a range between two limits to make weight control.
It is necessary to program a upper and lower limits with different values.
TARGET WEIGHT:
A point is set to perform the exact weight control.
It is necessary to program a upper and lower limits to the same value.

6.5.1.2 AUDIBLE ALARM OPERATIONS

OPERATION MODE 2 OF THE AUDIBLE ALARM.
It sets the operation mode of the audible alarm. When it will be in the range of control, the display will show OK and the alarm will ring
when the weight will be between the two limits. When it will be in the weight objective, of weight, the display will show OK and the alarm
will ring when the weight matches the value programmed in the limits.
MODE 3 OPERATION OF THE AUDIBLE ALARM.
It sets the operation mode of the audible alarm. When it will be in the range of control, the display will show OK and the alarm will ring
when the weight will be the out of bounds. When it will be in the weight objective, the display will show OK and the alarm will ring when
the weight does not match the value programd in the limits.
Charging
C
" P 10 "
requesting a sample of 10 pieces. Change the value of the sample by pressing the key
. When the calculation of number of parts show the number of parts that are on the platform, from this point on, the com-
.
to return to the normal mode of weighing.
and will start the counting function.
USER'S MANUAL BR40
Charging
C
. The display will
EN EN
37