Configuration - Giropes Baxtran BR 40 Manuel D'usager

7. CONFIGURATION

The viewer has 6 settings that can be set by the user, in addition to a method for entering the calibration section.
STEPS DESCRIPTION
1
To set up the parameters press the key
The display will show the first function:
2
Charging
C
3
If you press the key
Charging
4
C
If you press the key
It may be necessary to use
Charging
C
Use the key
5
Charging
C
Press the key
Use the key
FOR EXAMPLE, when the display shows "
Charging
The display will show "
to set the maximum limit.
Charging
C
After pressing the key
digit. Continue with the next digit, and establish the necessary quantities.
When all digits have been configured, press the key
example " ", Continue until you reach another parameter if its necessary or press the key
SET Lo
40
F0 H-L
, will scroll across the other functions
you are able to configure the function.
Charging
C
to increase a digit
to enter the value.
Charging
To leave the setting as it was.
C
Charging
C
" press the key
F0 H-L
C
", press the key
SET Lo
Charging
C
to set a limit, use the arrow keys
Charging
C
Charging
C
.
Charging
C
or set a value using the key
to start.
Charging
C
to establish the minimum limit, or press
to change the flicker digit and then use the key
to store the value. The display will return to the parameter that was just configured, for
USER'S MANUAL BR40
to change the active digit.
To move to the next parameter, "SET HI"
Charging
C
Charging
C
To return to the normal weight.
EN EN
To increase the flicker