Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Clip the FenderFire frame onto the brackets of
the heater within the outer surround. If the clips
securing the FenderFire frame do not fully engage
in the bracket, it may be due to the bottom piece
of the frame getting hung up on a high spot on
the hearth. If this is the case, loosen the nuts of
the bottom piece of the frame and raise it to the
appropriate height.
5. Loosen the bolts on the back of the cast iron fender
and drop the fender into place within the slotted
holes of its support at the base of the door frame.
Hang the cast iron ashpan on the hooks within the
fender.
6. Drop the door on the hinge pins.
Cleaning
The surround and the screened doors can be cleaned
with a soft brush.
To clean the fireplace glass window, refer to the
owner's manual supplied with the appliance.
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.
Designed and Manufactured by / for
Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfireplaces.com
Repair Parts List
1
Extension Baffl e
2
Clip-on Window Trim
3
Lower Support
4
Hinge Bracket
5
Screen Door Assembly
6
Cast Fret
4
5
WARNING
DO NOT TOUCH THE DOORS OR FIREPLACE
WHILE THEY ARE HOT! Let the fireplace
cool first before cleaning it.
FOR SAFETY PURPOSE, ensure the screen
doors are closed after maintenance before
operating the fireplace.
4000622PH
4002394BY
4000631AZ
4000593
4000563VI
4000625VI
2
1
6
3
3
Publicité
Table des Matières
