Error Code Display And Solutions - Royal Sovereign RBC-ES210-CA Manuel Du Propriétaire

ERROR CODE DISPLAY AND SOLUTIONS

The display may show some error codes when counting, which means there are some problems with
the machine. Refer to the chart below to solve the errors.
Error
Code
A
B
C
F
D
E01/E02
E03
E04
E05
9
If you are receiving error codes above, check the machine for dust. If you continue to receive error codes, please contact Royal
Sovereign's Customer Service at 1-866-961-6673
Reason
Suspect note is flagged due to UV
error
Suspect note is flagged due to MG
error (no magnet)
Suspect note is flagged due to chain
note error
Suspect note is flagged due to half
size error (partly ripped or folded)
Suspect note is flagged due to bill
width/dimensional error
The left (right) counting sensor is
dirty or broken
Code disc sensor is dirty or broken
Hopper sensor is dirty or broken
Stacker sensor is dirty or broken
Solutions
Remove first bill from the
stacker, then continue
counting.
Remove first bill from the
stacker, then continue
counting.
Remove first bill from the
stacker, then continue
counting.
Remove first bill from the
stacker, then continue
Remove first bill from the
counting.
stacker, then continue
counting.
Clean the sensor or
contact Royal Sovereign to
replace sensor if error
code persists.
Clean the sensor or
contact Royal Sovereign to
replace sensor if error
code persists.
Clean the sensor or
contact Royal Sovereign to
replace sensor if error
code persists.
Clean the sensor or
contact Royal Sovereign to
replace sensor if error
code persists.