Toro Power Max Heavy Duty 928 OAE Mode D'emploi page 27

Replacing the Headlight
Replace the headlight assembly (Toro part number 138-0670) when needed.
1. Remove the headlight wire from the back of the headlight (A of
2. Remove the bolt and nut holding the headlight assembly onto the headlight bracket and then remove the
old headlight assembly (B of
3. Secure the new headlight assembly onto the headlight bracket with the previously removed nut and
bolt (C of Figure
4. Insert the headlight wire straight into the back of the headlight until it is securely in place (D of
Figure 42).
42).
Figure
Figure 42
25
42).
Figure 42).
g326789