mundoclima MUCR-12-H9 Manuel D'installation page 98

Fan speed setting
Press the FAN SPEED button to set the fan speed.
(This button is unavailable when in the mode of Auto or Dry)
Fan speed
(Lock)
Room temperature sensor selection
Copy/
Follow me
Press the Follow me button to select whether
the room temperature is detected at the indoor
unit or the wire controller.
When the Follow me function indication
room temperature is detected at the wire controller.
Child lock function
Press the Lock botton for 3 seconds to activate the child lock
function and lock all buttons on the wire controller.
Press the button again for 3 seconds to deactivate the child
lock function.
Fan speed
(Lock)
When the child lock function is activated,the
Keypad tone setting
Swing Timer
°C & °F scale selection (on some models)
Copy/
Back/Turbo
Follow me
Turbo function (on some models)
Press the Turbo button to activate the turbo function.
Back/Turbo
Press the button again to deactivate the turbo function.
When the turbo function is activated,the
appears,the
mark appears.
Press the buttons Swing and Timer simultaneously for
3 seconds to close the keypad tone.
Press the buttons again for 3 seconds to open the keypad
tone.
Press the buttons Back and Copy simultaneously
for 3 seconds will alternate the temperature display
between the ℃&℉ scale.
98
Indoor Unit
mark appears.