Operation - Husqvarna ER 105 Manuel D'utilisation

Bracket Order No.
C 597157201
Introduction
WARNING: Read and understand the safety
chapter before you use the product.
To do before you operate the product
• Read the operator's manual carefully and make sure
that you understand the instructions.
• Do the daily maintenance. Refer to
schedule on page 11 .
Centrifugal force ER 105
The centrifugal force is not adjustable for ER 105.
Type, 3000 rpm, 50 Hz
ER 105
Type, 3600 rpm, 60 Hz
ER 105
To adjust the centrifugal force ER 205
1. Remove the bolts and washers that hold the end
To disassemble the product on
covers. Refer to
page 12 .
2. Remove the end covers.
3. Remove the bolts and the washers from each end of
the rotor.
4. Remove the eccentric weights from the shaft and
turn them 180° to adjust the centrifugal force. Refer
Eccentric weight adjustments for ER 205, 50 Hz
to
on page 8 and Eccentric weight adjustments for
ER 205, 60 Hz on page 8 .
CAUTION: Do the adjustments on each
end of the rotor.
Note: The positions of the eccentric weights are also
found on the inner side of the eccentric weights
covers. The factory positions for the products are set
to position 4.
8
High frequency (5400 rpm
60 Hz and 6000 rpm 50
Hz)
ER 207B. The bracket
must be welded to the
structure.

Operation

Maintenance
Centrifugal force, N
500
Centrifugal force, Lbs
118
Bracket Order No.
D 597157101
5. Assemble the product. Refer to
product on page 13 .
Eccentric weight adjustments for ER
205, 50 Hz
1 2
Type, 3000 rpm
ER 205 155
Position 1
Eccentric weight adjustments for ER
205, 60 Hz
1 2
Type, 3600 rpm
ER 205
Position
To adjust the centrifugal force ER 305,
ER 405 and ER 505
1. Remove the bolts and washers that hold the end
To disassemble the product on
covers. Refer to
page 12 .
2. Remove the end covers.
3. Remove the bolts and the washers from each end of
the rotor.
High frequency (5400 rpm
60 Hz and 6000 rpm 50
Hz)
ER 407B and ER 507B.
The bracket must be wel-
ded to the structure.
To assemble the
3 4
Centrifugal force, N
470 780 1100 1400
2 3 4
3 4
Centrifugal force, Lbs
48 144 240
1 2 3
1586 - 001 - 26.03.2021
5
5
336
4