Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8843997
5.
Before connecting the hose, clean the hose by blowing out with
compressed air. This will prevent moisture and/or dust in the hose
from entering the tool causing rust and/or malfunction.
VIBRATION PRECAUTIONS
1.
This tool vibrates during use. Repeated or long-term exposure to
vibration may cause temporary or permanent physical injury. Take
frequent breaks when using the tool.
2.
If you feel any medical symptoms related to vibrations (such as
tingling, numbness, and white or blue fingers), seek medical
attention as soon as possible.
3.
Wear suitable gloves to reduce the effects of vibration.
4.
DO NOT use this tool before consulting a physician if one of the
following applies:
a.
Pregnant
b.
Impaired blood circulation to
the hands
c.
Past hand injuries
5.
Do not use worn or ill-fitting sockets or extensions as this is likely to
cause a substantial increase in vibration.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage.
ASSEMBLY & INSTALLATION
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an
illustration or image.
INSTALL AIR COUPLER PLUG
Prepare a standard 1/4 in. NPT coupler plug (sold separately) for use
with your tool.
1.
Wrap the external threads of the coupler plug with sealant tape.
8
3/8 in. Air Impact Wrench
For technical questions call 1-800-665-8685
d. Nervous system disorders
e. Diabetes
f. Raynaud's Disease
V1.0
Publicité
Table des Matières
