Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
INTRODUCTION
This 3/8 in. Air Impact Wrench has a composite housing with a cushion
grip and maximum torque of 350 ft/lb. The tool has variable torque in
forward and reverse.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the
risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean,
well-lit and free of distractions. Place lights so you are not working
in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment away
from the work area.
3.
Store tools properly in a safe and dry location. Keep tools out of
the reach of children.
4.
Do not install or use in the presence of flammable gases, dust or
liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National
Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of
work performed.
2.
Wear the appropriate type of full-face shield in addition to safety
googles, as the work can create chips, abrasive or particulate matter.
3.
Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
Visit www.princessauto.com for more information
3/8 in. Air Impact Wrench
8843997
3
Publicité
Table des Matières
