Télécharger Imprimer la page

Siemens HCM65A Instructions D'installation page 7

Publicité

Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
11. Remove the 3/8" - 16 UNC 2B Belleville washer nuts from the line and/or load base.
12. Align compression lug over the 3/8" - 16 stud. Install the compression lug until seated onto the bus.
For Non-Fusible switches, secure with the Belleville washer nuts as shown in Fig's 17 & 18. For
Fusible switches, secure with the Belleville washer nuts as shown in Fig's 19 & 20.
Compression lug
(Not Included)
Belleville
washer nuts
Fig. 17
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
energizar el interruptor.
energizar el interruptor
energizar el interruptor
Non-Fusible switch unit.
7 / 8 (English)
Released Production, 1P v1, Feb 04, 2016
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
Refer to Compression Lug Label
for proper torque value
Fig. 18
I.L. No. 508536A00

Publicité

loading

Ce manuel est également adapté pour:

Hncm65aHcm66aHncm66a