Télécharger Imprimer la page

Siemens HCM65A Instructions D'installation page 6

Publicité

Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
8. Secure new line base assembly with line base mounting screws as shown in Fig 13. See Fig 14 for
sequence of line base mounting screw placement.
9. Position replacement load base assembly over the holes in the enclosure that mounted the original
base as shown in Fig 15.
10. Secure replacement load base assembly with load base mounting screws as shown in Fig 16. See Fig
16 for sequence of load base mounting screw installation.
Torque to
Torque to
30 lb-ins.
(3.39 Nm)
Fig. 13
Fig. 15
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor
energizar el interruptor.
energizar el interruptor.
energizar el interruptor
Torque to
30 lb-ins.
(3.39 Nm)
Replacement
Replacement
Load Base
Assembly
6 / 8 (English)
Released Production, 1P v1, Feb 04, 2016
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
2 nd
Note the order of the first 2 (of 6) mounting screws
to secure the Line Base Assembly.
Fig. 14
Fig 14
2 nd
Fig. 16
Note the order of the first 2 (of 4) mounting
screws to secure the Load Base Assembly.
1 st
1 st
1 t
I.L. No. 508536A00

Publicité

loading

Ce manuel est également adapté pour:

Hncm65aHcm66aHncm66a