Hella 2XT 959 510 Serie Mode D'emploi

Part Number: 2XT 959 510-xxx
Hella-New Zealand Ltd.
LED COURTESY LAMP, FLUSH MOUNT (wide rim)
Lamp Mounting Instructions
Ensure the lamp is mounted on a flat surface with the gasket provided. The lens may be used as a template
for drilling the mounting holes. Mount the lamp and fit screw caps into the mounting hole recesses of the lens.
Note: Lamp is fully sealed and has no serviceable components.
If it is necessary to remove the screw caps, use a pin.
Mounting Surface
All Dimensions in millimetres
Wiring Colour Coding
Lamp is polarity conscious. The reversal of the polarity will not damage this product but will inhibit its function.
Hella recommends wire connections be soldered, and heat shrink tubing applied to seal the joint.
Part Number Lamp Colour Lens Colour
2XT 959 510-42x White Lamp Clear
2XT 959 510-84x White Lamp Clear
2XT 959 510-85x White Lamp Clear
2XT 959 510-90x Warm White Lamp Clear
2XT 959 510-70x Red Lamp Clear
2XT 959 510-71x Red Lamp Red
2XT 959 510-75x Red Lamp Clear
2XT 959 510-76x Red Lamp Red
2XT 959 510-50x Amber Lamp Clear
2XT 959 510-51x Amber Lamp Amber
2XT 959 510-55x Amber Lamp Clear
2XT 959 510-56x Amber Lamp Amber
2XT 959 510-65x Blue Lamp Clear
2XT 959 510-62x Green Lamp Clear
NB: Lamp must be protected by a fuse rated at 2 amperes maximum.
For general comments about Hella's product please contact us on E-mail at techfeedback@hella.co.nz
83.9
Screw hole
58.8
diameter = 4mm
44.0
Cable Cable Voltage Power
Earth (-) Positive (+) Consumption
Black White 10-33V 0.5 watt
Black Red 10-33V 0.5 watt
Black White 10-33V 0.5 watt
Black White 10-33V 0.5 watt
Black Red 12V 0.5 watt
Black Red 12V 0.5 watt
Black Red 24V 0.5 watt
Black Red 24V 0.5 watt
Black Amber 12V 0.5 watt
Black Amber 12V 0.5 watt
Black Amber 24V 0.5 watt
Black Amber 24V 0.5 watt
Black White 10-33V 0.5 watt
Black White 10-33V 0.5 watt
Part Number: 2XT 959 510-xxx
Hella-New Zealand Ltd.
LED COURTESY LAMP, FLUSH MOUNT (wide rim)
Lamp Mounting Instructions
Ensure the lamp is mounted on a flat surface with the gasket provided. The lens may be used as a template
for drilling the mounting holes. Mount the lamp and fit screw caps into the mounting hole recesses of the lens.
Note: Lamp is fully sealed and has no serviceable components.
If it is necessary to remove the screw caps, use a pin.
Mounting Surface
All Dimensions in millimetres
Wiring Colour Coding
Lamp is polarity conscious. The reversal of the polarity will not damage this product but will inhibit its function.
Hella recommends wire connections be soldered, and heat shrink tubing applied to seal the joint.
Part Number Lamp Colour Lens Colour
2XT 959 510-42x White Lamp Clear
2XT 959 510-84x White Lamp Clear
2XT 959 510-85x White Lamp Clear
2XT 959 510-90x Warm White Lamp Clear
2XT 959 510-70x Red Lamp Clear
2XT 959 510-71x Red Lamp Red
2XT 959 510-75x Red Lamp Clear
2XT 959 510-76x Red Lamp Red
2XT 959 510-50x Amber Lamp Clear
2XT 959 510-51x Amber Lamp Amber
2XT 959 510-55x Amber Lamp Clear
2XT 959 510-56x Amber Lamp Amber
2XT 959 510-65x Blue Lamp Clear
2XT 959 510-62x Green Lamp Clear
NB: Lamp must be protected by a fuse rated at 2 amperes maximum.
For general comments about Hella's product please contact us on E-mail at techfeedback@hella.co.nz
83.9
Screw hole
58.8
diameter = 4mm
44.0
Cable Cable Voltage Power
Earth (-) Positive (+) Consumption
Black White 10-33V 0.5 watt
Black Red 10-33V 0.5 watt
Black White 10-33V 0.5 watt
Black White 10-33V 0.5 watt
Black Red 12V 0.5 watt
Black Red 12V 0.5 watt
Black Red 24V 0.5 watt
Black Red 24V 0.5 watt
Black Amber 12V 0.5 watt
Black Amber 12V 0.5 watt
Black Amber 24V 0.5 watt
Black Amber 24V 0.5 watt
Black White 10-33V 0.5 watt
Black White 10-33V 0.5 watt