Hella 2XT 959 510-45 Serie Notice Technique

Part Number: 2XT 959 510-xxx
Hella-New Zealand Ltd.
LED COURTESY LAMP, FLUSH MOUNT (narrow rim)
Lamp Mounting Instructions
Ensure the lamp is mounted on a flat surface with the gasket provided. The lens may be used as a template
for drilling the mounting holes. Mount the lamp and fit screw caps into the mounting hole recesses of the lens.
Note: Lamp is fully sealed and has no serviceable components.
If it is necessary to remove the screw caps, use a pin.
Wiring Colour Coding
Lamp is polarity conscious. The reversal of the polarity will not damage this product but will inhibit its function.
Hella recommends wire connections be soldered, and heat shrink tubing applied to seal the joint.
Part Number Lamp Colour Lens Colour
2XT 959 510-45x White Lamp Clear
2XT 959 510-93x Warm White Lamp Clear
2XT 959 510-30x Red Lamp Clear
2XT 959 510-31x Red Lamp Red
2XT 959 510-35x Red Lamp Clear
2XT 959 510-33x Red Lamp Red
2XT 959 510-37x Red Lamp Clear
2XT 959 510-00x Amber Lamp Clear
2XT 959 510-01x Amber Lamp Amber
2XT 959 510-05x Amber Lamp Clear
2XT 959 510-06x Amber Lamp Amber
2XT 959 510-25x Blue Lamp Clear
2XT 959 510-15x Green Lamp Clear
2XT 959 510-16x Green Lamp Clear
NB: Lamp must be protected by a fuse rated at 2 amperes maximum.
For general comments about Hella's product please contact us on E-mail at techfeedback@hella.co.nz
78.8
Screw hole
57.4
diameter = 4mm
43.9
All Dimensions in millimetres
Cable Cable Voltage
Earth (-) Positive (+) Consumption
Black White 10-33V
Black White 10-33V
Black Red 12V
Black Red 12V
Black Red 24V
Black Red 24V
Black Red 8-28V
Black Amber 12V
Black Amber 12V
Black Amber 24V
Black Amber 24V
Black White 10-33V
Black White 10-33V
Black White/Red 10-33V
Hella-New Zealand Ltd.
LED COURTESY LAMP, FLUSH MOUNT (narrow rim)
Lamp Mounting Instructions
Ensure the lamp is mounted on a flat surface with the gasket provided. The lens may be used as a template
for drilling the mounting holes. Mount the lamp and fit screw caps into the mounting hole recesses of the lens.
Note: Lamp is fully sealed and has no serviceable components.
If it is necessary to remove the screw caps, use a pin.
Wiring Colour Coding
Lamp is polarity conscious. The reversal of the polarity will not damage this product but will inhibit its function.
Hella recommends wire connections be soldered, and heat shrink tubing applied to seal the joint.
Part Number
Power
2XT 959 510-45x
0.5 watt
2XT 959 510-93x
0.5 watt
2XT 959 510-30x
0.5 watt
2XT 959 510-31x
0.5 watt
2XT 959 510-35x
0.5 watt
2XT 959 510-33x
0.5 watt
2XT 959 510-37x
0.5 watt
2XT 959 510-00x
0.5 watt
2XT 959 510-01x
0.5 watt
2XT 959 510-05x
0.5 watt
2XT 959 510-06x
0.5 watt
2XT 959 510-25x
0.5 watt
2XT 959 510-15x
0.5 watt
2XT 959 510-16x
0.5 watt
NB: Lamp must be protected by a fuse rated at 2 amperes maximum.
For general comments about Hella's product please contact us on E-mail at techfeedback@hella.co.nz
Part Number: 2XT 959 510-xxx
78.8
57.4
43.9
All Dimensions in millimetres
Lamp Colour Lens Colour Cable Cable
Earth (-) Positive (+)
White Lamp Clear Black White
Warm White Lamp Clear Black White
Red Lamp Clear Black Red
Red Lamp Red Black Red
Red Lamp Clear Black Red
Red Lamp Red Black Red
Red Lamp Clear Black Red
Amber Lamp Clear Black Amber
Amber Lamp Amber Black Amber
Amber Lamp Clear Black Amber
Amber Lamp Amber Black Amber
Blue Lamp Clear Black White
Green Lamp Clear Black White
Green Lamp Clear Black White/Red
Screw hole
diameter = 4mm
Voltage Power
Consumption
10-33V 0.5 watt
10-33V 0.5 watt
12V 0.5 watt
12V 0.5 watt
24V 0.5 watt
24V 0.5 watt
8-28V 0.5 watt
12V 0.5 watt
12V 0.5 watt
24V 0.5 watt
24V 0.5 watt
10-33V 0.5 watt
10-33V 0.5 watt
10-33V 0.5 watt