Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
3.
Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
a.
Do not wear gloves when operating a tool that can snag the
material and pull the hand into the tool.
4.
Wear protective clothing to protect eyes and skin from contact with
sprayed materials.
5.
Non-skid footwear is recommended to maintain footing and
balance in the work environment
6.
Wear the appropriate rated dust mask or respirator. Wear a NIOSH
approved respirator when working on materials that produce
hazardous fumes, dust or particulate matter.
7.
The air source used with this tool may cause hearing damage.
Wear ear protection gear to eliminate or reduce the noise.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and
balance enables better control in unexpected situations.
4.
Support the workpiece or clamp it to a stable platform. Holding the
workpiece by hand or against your body may lead to personal
injury.
5.
Securely hold this tool using both hands. Using a tool with only one
hand can result in loss of control.
SPECIFIC SAFETY
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
Page 5
2-SPEED SLIDING MITER SAW
Assistance available at www.princessauto.com or 1-800-665-8685
8987646
Publicité
Table des Matières
