Publicité
Les langues disponibles
Les langues disponibles
SAFETY INFORMATION
SAFETY INFORMATION
FOR YOUR OWN SAFETY READ THIS
OPERATOR'S MANUAL BEFORE
OPERATING GRINDER
Keep this manual for future reference To
ensure the correct use of the grinder and to
prevent accidents, do not start working without
having read this manual carefully The manual
explains how the various components work
and provides instructions for carrying out the
necessary checks and maintenance operations
SAFETY RULES AND PRECAUTIONS
WARNING The use of accessories or
attachments not recommended by the
manufacturer may result in a risk of injury to
operator or bystander Any maintenance operation
not described in this manual must only be
carried out by an AUTHORIZED service center
CAUTION The following instructions
should be carefully followed in order to
reduce the risk of kickback resulting from
improperly sharpened saw chain
WARNING Replace cracked or
damaged grinding wheel immediately
Serious injury to operator or bystander
could result from a damaged wheel
USERS
The grinder must only be used by adults
Users must be in good physical condition
and familiar with the instructions for use
KEEP BYSTANDERS AND CHILDREN AWAY
All bystanders should be kept at a
safe distance from work area
WEAR PROPER APPAREL
Never wear loose clothing, bracelets, neckties, rings
or any other jewelry that could come into contact
or get caught with the grinding wheel or any other
moving parts Nonslip footwear is recommended
Wear protective hair covering to contain long hair
ALWAYS USE SAFETY GLASSES
AND GLOVES
Always wear gloves and protective eyewear
while operating the grinder and while retouching
the grinding wheel using the dressing stone
Also use face or dust mask if cutting operation
is dusty Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses
NEVER STOP THE WHEEL WITH YOUR HANDS
Never attempt to stop the rotation of the
grinding wheel with your hands
6
DISCONNECT TOOLS BEFORE SERVICING
Make sure the plug is disconnected when fitting
or changing the grinding wheel and during any
other operation of maintenance or transport
KEEP GUARDS IN PLACE AND
IN WORKING ORDER
Never start the grinder without
the wheel guards in place
REMOVE ADJUSTING KEYS AND WRENCHES
Make sure that keys and adjusting wrenches
are removed from tool before turning it on
DON'T FORCE TOOL
It will do the job better and safer at the
rate for which it was designed Each
grinder has a plate indicating:
– Size of arbor: Ø 866" (22 mm)
– No-load speed in revolutions
per minute: RPM 3400
– Always read operator's manual
before operating the machine
– Always wear eye and face protection
– Always use the proper grinding wheel
Also make sure that the voltage and frequency
indicated on the plate applied to the grinder
correspond to those of the mains hook-up
REDUCE THE RISK OF
UNINTENTIONAL STARTING
Always make sure that the start-up
switch is in the "0" (OFF) position before
connecting the plug to the outlet
NEVER USE CABLES, PLUGS OR
EXTENSION CABLES THAT ARE
DEFECTIVE OR NON-STANDARD
See "Minimum Extension Cord Gauges" table
on page 8 Remove the plug from the mains
immediately if the cable is damaged or cut;
for cable repair or replacement, contact your
authorized dealer or service center The power
supply cable is complete with terminals – with
protection The internal electrical connection
consists of inserting the feeding cable terminals
directly in the switch The electrical connection
to the mains shall be made in such a way as
to prevent damage by people or vehicles
which could endanger both them and you
KEEP WORK AREA CLEAN
Cluttered areas and benches invite accidents
Make sure that the grinding wheel working
area is free of tools or other objects before
starting up the grinder Frequently clean
grinding dust from beneath grinder
520-120
Publicité
