Basic Operations - Kenwood KDC-MP102U Mode D'emploi

Basic operations

Loading slot
Detaches the faceplate
The following indicator lights up when...
ST: A stereo broadcast is received (FM).
IN: A disc is in the unit.
Maintenance
Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to
observe this precaution may result in damage to the monitor or unit.
Cleaning the connector: The unit may not function
properly if the connectors between the unit and faceplate
are dirty. Detach the faceplate and clean the connector
with a cotton swab gently, being careful not to damage
the connector.
Handling discs
Do not touch the recording surface of the disc.
Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
Do not use any accessories for the disc.
Clean from the center of the disc and move outward.
Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
When removing discs from this unit, pull them out horizontally.
Remove the rims from the center hole and disc edge before inserting a disc.
4
Remote sensor
Do not expose to bright sunlight.
Volume knob
(Not used.)
Display window
USB terminal
Auxiliary input jack
Connector (on the reverse
side of the faceplate)
Ejects the disc