Makita 449 Manuel D'instructions page 23

All manuals and user guides at all-guides.com
D - MAINTENANCE
VERY
IMPORTANT: Always unplug the appliance from the
power supply.
1
....
CHANGING THE OPTIONAL COLLECTION BAG
- Remove the plastic flange (x) from the air inlet connector
(y) fig. "D1".
- Take out the full PE bag fig. "D2".
- Close the flange (X) with the cap provided fig. "D3".
2
....
FOAM FILTER
- Rinse the foam filter with water. DO NOT use detergent fig.
"D4".
- Replace if it is worn or damaged.
3
.... CARTRIDGE FILTER
- Clean the cartridge frequently with a soft-bristled brush
fig. "D5".
- For thorough cleaning, flush with water from the inside
out fig. "D6".
- Before replacing the cartridge filter make sure it is
completely dry.
- Replace if it is worn or damaged.
4
.... BASKET PRE-FILTER
- Clean the pre-filter (p) and the basket (g) by spraying water
from the inside out fig. "D8".
Make sure it is completely dry before using it again.
Replace if it is worn or damaged.
- 23 -
EN
Cod.
83 139H0B *
Cod.
83 035H0B
Cod.
83 140H0G *
Cod.
83 010H0I
*
Pack code