Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
EN
3
....
WET VACUUM MODE:
CAUTION:
Always remove the cartridge filter and the basket pre-filter. Replace them
with the foam filter.
-
When the vacuumed liquids reach the maximum level inside the drum, suction is
automatically shut off by the safety float.
The user is alerted by the increase in the rpm rate of the motor and by the lack of suction.
Switch off the appliance immediately and empty the drum.
4
....
TO VACUUM LARGE QUANTITIES OF LIQUID
-
To ensure partial air flow make sure the crevice tool is never completely immersed fig. "C2".
5
....
DRY VACUUM/POWER TOOL MODE:
CAUTION:
• Remove the foam filter.
• Fit the basket pre-filter and the cartridge filter.
-
Always keep the filter system in good working order to ensure long-lasting, efficient
operation.
-
We recommend frequently cleaning the cartridge filter as illustrated on pg. 23.
-
Attach the connector (u) of the flexible hose to the air inlet connector (r) fig. "C1".
-
Fit the adapter (q) onto the power tool attachment fig. "C3".
-
Plug in the power tool, then the vacuum fig. "C4"-"C5".
-
Hook the power tool power supply cord onto the flexible hose fig. "C6".
-
Switch on the appliance.
6
....
USING THE BLOWER MODE
-
Remove the drum (p) complete with the HEPA exhaust filter fig. "D10".
-
Attach the flexible host connector (u) to the exhaust connector (r) and turn it clockwise
fig. "C7"-"C8".
-
Switch on the appliance (page 19).
- 22 -
Publicité
