Starting The Robotic Cleaner; Cleaning Cycle; Stopping Robotic Cleaner Operation; Pulling Cleaner Unit Out Of The Water - Pentair PROWLER P Serie Guide D'installation Et D'utilisation

Starting the robotic cleaner

Connect the power supply to the wall socket. The on/off button will lit and the robotic cleaner will start its cleaning
program. If the power supply is already connected to the wall socket, the on/off button will fl ash to indicate that the
robotic cleaner is in standby mode. Press the On/Off button in order to change the above mode (On to Off – standby,
or vice versa). Note: if the full fi lter indication light is ON make sure to remove and clean the fi lter prior to putting
the cleaner inside the pool water.

Cleaning cycle

During the cleaning cycle, the cleaner: (1) moves across the pool fl oor picking up dirt and debris. (2) Changes
direction and rotates automatically according to the selected program. (3) Climbs the pool walls every few minutes,
as set in its internal program. Note: The robotic cleaner might occasionally stop moving for a few seconds. This is
part of normal operation, not a malfunction.

Stopping robotic cleaner operation

The robotic cleaner moves automatically to ' s tandby' after every cleaning cycle and the on/off button starts fl ashing.
To stop the cleaner operation during a cleaning cycle, press the operation button once. On/off button starts fl ashing
and the cleaner is in standby mode.

Pulling cleaner unit out of the water

(1) Unplug the fl oating cable from the power supply. (2) Pull the fl oating cable until the unit is close enough to reach
the handle. (3) Using the handle, lift the cleaner out of the pool.

Bluetooth connection

The Prowler P20/P25 models have the option of being connected to a bluetooth application, Scan the QR code in
page 7 to access the App Store or Google Play When the application is installed and opened, it will start automatically
to scan to see if it can fi nd a robot that works within Bluetooth range.
Power Supply
Prowler P10
On/Off
CAUTION: Do not use the fl oating cable
to lift the cleaner out of the water.
PROWLER P-SERIES Robotic Inground Pool Cleaner Installation and User' s Guide
OPERATION
Power Supply
Prowler P20/25
On/Off
Full fi lter
indicator
Bluetooth