Introduction; System Overview; Robotic Cleaner Operation; Operating Conditions - Pentair PROWLER P Serie Guide D'installation Et D'utilisation

INTRODUCTION

System overview

The robotic cleaner sweeps the pool fl oor and walls collecting dirt and debris in its fi lters. This user manual
explains how to operate the robotic cleaner, including cleaning, maintenance and storage procedures.
Note: This manual reviews several different models with variations in components.

Robotic cleaner operation

Once the robotic cleaner is placed in the pool and activated, it operates according to its program. It moves along the fl oor
and walls of the pool, covering the entire area of the pool fl oor and walls. When it has fi nished its program, it remains inactive
on the pool fl oor. Power will automatically shut off. Note: It' s not recommended to stop the pool cleaner prior to cycle end.
Note: Wall climbing is an optional feature. When the wall climbing feature is enabled, the robotic cleaner climbs the
wall at intervals according to its internal program. Its ability to climb over stairs in swimming pool is subject to stair
geometry and material.

Operating conditions

The robotic cleaner is intended for use in residential swimming pools only and in the following conditions:
(1) Recommended water temperature 22°C-32°C. (2) Water pH : 7.2 - 7.6 (3) Chlorine level: pool is
maintained according to the pool manufacturer's instructions. (Recommended Chlorine level: 2-4 ppm)
Note: Failure to maintain the pool according to the recommended operating conditions could prevent the robotic
cleaner from functioning properly.

Components

Power
supply
or
Power P10 Power P20/25
Power
Robotic pool
cable
cleaner
PROWLER P-SERIES Robotic Inground Pool Cleaner Installation and User' s Guide