Sauder Hutch 417587 Mode D'emploi page 7

Step 3
Fasten the MOLDINGS (M) to the ENDS (A and B). Use
å
four BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: There are no pre-drilled holes in the MOLDINGS (M).
å
The SCREWS will tighten into the grooves.
M
www.sauder.com/services
Groove
Finished edge
BLACK 9/16" LARGE HEAD SCREW
B
M
417587
1S
(4 used in this step)
A
Finished edge
Page 7