Sauder 408761 Mode D'emploi page 15

Step 11
1
D14
O
Groove
Insert the LARGE DRAWER SIDES (D14 and D15)
å
at an angle into the slot at each end of the LARGE
DRAWER FRONT (O).
3
Fasten the LARGE DRAWER BACK (D78) to the LARGE DRAWER
å
SIDES (D14 and D15). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D716) inserts into the groove of the
å
LARGE DRAWER BACK (D78).
Repeat this step for the remaining drawer using the LARGE
å
DRAWER BOTTOM (D707).
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D15
D78
D14
D716
VIEW THE T-LOCK BOX VIDEO
2
D14
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D716) into the grooves in
å
the LARGE DRAWER SIDES (D14 and D15) and LARGE
DRAWER FRONT (O).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D15
408761
With the palm of
your hand, tap the
DRAWER BOTTOM
U n
down into the groove.
fi n
s u
i s h
r f a
e d
c e
D716
D15
O
30S
(8 used in this step)
Page 15