Makita BMR103 Manuel D'instructions page 11

5. During radio alarm symbol is flashing, rotate Tuning
control knob to select desired wake-up band and
station, then press Tuning control knob to confirm the
selection.
6. Rotate Tuning control knob to select the desired
volume and press Tuning control knob to confirm the
volume. Radio alarm setting is now completed.
Note:
If new radio alarm station is not selected, it will select
the last alarm station.
Note:
If the selected AM/FM alarm station is not available
when the alarm is sounding, the buzzer alarm will be
used instead.
b. Setting HWS (Humane Wake System) buzzer alarm:
A beep tone will activate when selecting the HWS buzzer
alarm.
The alarm beep will sound shorter every 15 seconds for
one minute followed by one minute silence before
repeating the cycle.
1. The buzzer alarm can be set either when the radio is
on or off.
2. Press and hold the buzzer alarm button
symbol and the display hour will flash along with a
beep.
3. During buzzer alarm symbol
Tuning control knob
Tuning control knob
Then rotate the Tuning control knob
minute and press Tuning control knob
minute setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE - the alarm will sound once
DAILY - the alarm will sound everyday
WEEKDAY - the alarm will sound only on weekdays
WEEKEND - the alarm will sound only at weekends
Press the Tuning control
Note:
There is no volume adjustment for buzzer alarm.
When the alarm sounds
To cancel a sounding alarm, press the Power button
.
Disabling/cancelling alarms
To disable an active alarm, either press the Power button
, or press and hold the corresponding alarm button to
cancel the alarm.
, the
flashes, rotate
to select the hour and press
again to confirm hour setting.
to select the
to confirm
to confirm the setting.
Snooze
1. When the alarm sounds, press any button other than
the Power button will silence the alarm for 5 minutes.
"SNOOZE" will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Menu/Info button
setting.
3. Rotate the Tuning control
appears on the display, then press the Tuning control
to enter the setting. Rotate the Tuning control
to adjust the silence time from 5, 10, 15 and
20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is
suspended, press the Power button
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 60, 45, 30, 15, 120 and 90 minutes.
1. Press and hold the Power button
Sleep Timer setting. "SLEEP XX" will show on the
display.
2. Keep holding the Power button
Timer options will start switching on the display. Stop
until the desired Sleep Timer setting appears on the
display. The setting will be saved and the LCD will
return to normal display.
3. Your radio will switch off automatically after the preset
Sleep Timer has elapsed. The Sleep Timer icon
will show on the display indicating an active Sleep
Timer.
4. To cancel the Sleep Timer function before the preset
time has elapsed, simply press the Power button
to turn the unit off manually.
Loudness
You can get compensation on lower and higher frequency
for your BMR103 by adjusting the loudness function.
1. Press and hold the Menu/Info button
menu setting.
2. Rotate the Tuning control
"LOUD OFF" appears on the display. Press the
Tuning control to enter the setting.
3. Rotate the Tuning control to
the loudness function, then press the Tuning control
to confirm the setting.
4. To turn off the loudness function, select OFF and
press the Tuning control
to enter the menu
until "SNOOZE X"
.
to enter the
and the Sleep
to enter the
until "LOUD ON" or
choose ON to turn on
to confirm the setting.
11