Battery Pack Installation - RIDGID HD03180 Mode D'emploi

BATTERY PACK INSTALLATION

WARNING:
!
Turn unit OFF before removing/installing the
battery pack.
NOTE: Lithium Ion Battery Pack and Charger sold
separately unless included in a bundle.
INSTALLATION OF BATTERY PACK (Fig. 3)
NOTE: Use ONLY RIDGID brand Battery Packs.
The HD03180 will operate with the following Battery
Packs:
Battery Packs:
• R840020
• R840086
• R840040
• R840087
• R840060
• R840088
• R840080
• R840089
• R840083
• R8400806
• R840085
1. Push down on the Side Battery Pack Compartment
Lid Latch, located at the top left of the Powerhead
Assembly (A). Open the Side Battery Pack
Compartment Lid to expose the Battery Pack
Receptacle.
2. With the Release Buttons positioned at the top of
the fully charged Battery Pack, slide the Battery
Pack down onto the Wet/Dry Vac Battery Pack
Receptacle. The Battery Pack should engage into
the Battery Pack Receptacle terminal until you hear
an audible click.
NOTE: Do Not push the Release Buttons on the Battery
Pack at this time.
3. While holding the Cordless Wet/Dry Vac with one
hand, Close the Side Battery Pack Compartment Lid.
S
L
I
D
E
Battery Pack
Battery Pack
Terminal
Battery Pack
Receptacle
(A)
Side Battery Pack
Compartment Lid
Side Battery Pack
Compartment
Lid Latch
Chargers:
• R840093
• R8400809
• R840094
• R87002
• R840095
• R87004
• R86091
• R87005
• R86092
• R870015
• R86093
Fig. 3
Release
Button (2)
REMOVAL OF BATTERY PACK (Fig. 4)
1. Push down on the Side Battery Pack Compartment
Lid Latch, located at the top left of the Powerhead
Assembly (A). Open the Side Battery Pack
Compartment Lid to expose the Battery Pack.
2. Press both Release Buttons, located on each side
of the Battery Pack, at the same time and slide
the Battery Pack up and off the Battery Pack
Receptacle.
3. Plug the Battery Pack Charger into a Wall Receptacle
and place Battery Pack into the Charger to recharge
the Battery Pack.
4. While holding the Cordless Wet/Dry Vac with one
hand, Close the Side Battery Pack Compartment
Lid, until Battery Pack is fully charged and ready to
be reinstalled.
WARNING:
!
To reduce the risk of electric shock, do not handle
battery pack with wet hands or place wet battery
pack into charger.
S
L
I
D
E
Battery Pack
Battery Pack
Terminal
Battery Pack
Receptacle
(A)
Side Battery Pack
Compartment Lid
Side Battery Pack
Compartment
Lid Latch
Battery Pack Charger
(sold separately unless
included in a bundle)
Lithium Ion Battery Pack
(sold separately unless
included in a bundle)
8
Fig. 4
Release
Button (2)