Rimage Everest III Mode D'emploi page 20

Set the Printable Area (PC)
This functionality allows you to adjust the printable area settings for standard CD/DVD 120 mm media, which sets the outer
and inner diameters to print the disc label without overlapping the disc edges.

Note: Printable area settings created within a CD Designer label file will override the printer and fax settings on Windows.
1. Access printing preferences. Refer to page 17 for instructions.
2. Select the Advanced tab.
3. View or change the Printable Area preferences.
a. Select the Modify button. The Printable Area Settings window opens.
b. To modify only Standard Area settings, select the Standard radio button.
Enter the desired Outer Diameter.
i.
ii. Enter the desired Inner Diameter.
c. To print on a disc with a stacking ring, select the Advanced radio button. The Hub Area settings display.
i. Enter the desired Outer Diameter for the hub.
ii. Enter the desired Inner Diameter for the hub.
Tip: Most discs like the one shown above
have the following printable areas:
•
Outer Diameter 118 mm
•
Inner Diameter 24 mm
d. Select OK to save the changes. The Printable Area Settings window closes.
4. When you have made the desired choices in the Rimage Everest Printing Preferences window, select Apply.
5. Select OK to close the Rimage Everest Printing Preferences window.
2000621_B
All manuals and user guides at all-guides.com
Set Your Printing Preferences
Tip: Most discs like the one shown above
have the following printable areas:
Standard Area:
•
Outer Diameter 118 mm
•
Inner Diameter 38 mm
Hub Area:
•
Outer Diameter 35 mm
•
Inner Diameter 17 mm
19