Rimage Everest III Mode D'emploi page 16

Rimage Everest™ III and 600 User Guide
Switches
There are two switches on the rear of the
Everest printer: the mode switch and the
AC voltage switch.
Mode Switch
-
Important! After changing the mode, the printer must be powered off and back on again for the change to be recognized.
The mode switch is a rotary switch used to set the operational mode of the Everest printer. The opening at the base of the cap
on the switch indicates the selected mode. When the printer is shipped, it is set to the correct mode for your operation. You
should not have to change the switch position unless you perform diagnostic tests.
Switch Position
0
2
3
All others
AC Voltage Switch
The AC voltage switch is used to select the AC voltage of the power outlet. This switch has two positions: 110V and 220V.
, ,
Warning! Set the AC voltage switch to match the voltage of the AC power outlet.
14
All manuals and user guides at all-guides.com
Use
Standalone printer
Rimage autoloader or
AutoPrinter
Diagnostic testing
Not used
Mode Switch
AC Voltage
Switch
2000621_B