STEP 3. PREPARING THE DISHWASHER
1. Install the Protective sticker
Attach the Protective sticker to the bottom of the counter top as shown in the picture.
2. Push half the product into the space under the counter top.
If you push the entire product under the counter top, you will not be able to adjust both the front
legs of the product in the next STEP.
3. Prepare the power cord, water supply hose and drain hose.
•
Take care that you do not bend or fold the cord or hose.
•
Do not connect the power cord until the installation of the dishwasher is complete.
CAUTION
4. Pull the power cord, water supply hose and drain hose through the hole to the sink as shown by the
fi gure above.
BU-Install_DD68-00157A-08_EN.indd 13
BU-Install_DD68-00157A-08_EN.indd 13
.
3
Installing your dishwasher
2017-02-08
2017-02-08
_13
1:25:25
1:25:25