WMF KITCHENminis XXL Mode D'emploi page 13

Acrylamide is generated during excessive browning. Excessive browning of
the toast should therefore be avoided.
The various functions - single-sided toasting, warming/toasting and defrosting -
can be activated after the lift button (1) has been pressed downwards. The button
of the selected function is illuminated during the toasting process.
Single sided toasting
Ideal for baguettes, rolls and bagels. For single-sided toasting of a baguette, for
example, cut the baguette lengthwise. Place it in the bread slot so that the cut
side is facing the front. If this button is pressed immediately after switching the
toaster on, the slice will only be toasted on the front (where the WMF logo is
located).
Warming / retoasting
If the warming button (3) is pressed immediately after switching on the appli-
ance, cold but already toasted bread will be crisped up and too lightly toasted
bread will be slightly retoasted.
Defrosting
If this button (4) is pressed directly after the appliance is switched on, the
toasting cycle will be extended automatically to toast frozen bread.
Stop button
To interrupt the toasting process prematurely, press the stop button (5). It is
always illuminated during toasting.
Removing the toast
With the integrated automatic lift mechanism, small slices of bread can also be
removed safely and easily.
Bread roll attachment
The toaster is fitted with an integrated roll attachment, which can be used by
pressing the button (7) downwards.
One roll can be warmed up from either side on a medium setting in each case.
Rolls which are too dry should be moistened slightly beforehand - it works better
this way.
Crumb tray
Crumbs produced during toasting are collected in the crumb tray (8).
To empty, briefly press against the crumb tray (8). You can then pull the tray out
of the appliance.
13