Check Your Vent System For Good Airflow - Kenmore 81442710 Guide D'utilisation Et D'entretien

CHECK YOUR VENT SYSTEM FOR GOOD AIRFLOW

Good airflow
Along with heat, dryers require good airflow to efficiently
dry laundry. Proper venting will reduce your drying times and
improve your energy savings. See Installation Instructions.
The venting system attached to the dryer plays a big role
in good airflow.
Service calls caused by improper venting are not covered by
the warranty and will be paid by the customer, regardless of
who installed the dryer.
Use Automatic cycles for better fabric care and energy savings
Use the Automatic Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Dry
cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle, and the dryer
shuts off when the load reaches the selected dryness.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to overdrying.
Use Timed Dry for the occasional damp load that needs a little more drying time.
Maintain good airflow:
• Clean your lint screen before each load.
• Replace plastic or foil vent material with 4" (102 mm)
diameter heavy, rigid vent material.
• Use the shortest length of vent possible.
• Use no more than four 90° elbows in a vent system;
each bend and curve reduces airflow.
Good
• Remove lint and debris from the exhaust hood.
• Remove lint from the entire length of the vent system at
least every two years. When cleaning is complete, be sure
to follow the Installation Instructions supplied with your
dryer for final product check.
• Clear away items from the front of the dryer.
4"
(102 mm)
Better
5