Using Your Dryer - Kenmore 81442710 Guide D'utilisation Et D'entretien

WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the Important Safety Instructions before operating
this dryer.
Before using your dryer, wipe the dryer drum with a damp cloth
to remove dust from storing and shipping.
1.
Clean lint screen
Clean the lint screen before each load.
Reach inside the drum and pull out the lint screen and its cover.
Separate the cover and the screen by squeezing the screen and
pulling on the cover at the same time. Roll lint off the screen with
your fingers. Put the lint screen and its cover back together and
push firmly into place.
Do not rinse or wash screen to remove lint. For additional cleaning
information, see "Cleaning the lint screen."
2.
Load dryer
Place laundry in the dryer. Close the door.
Do not tightly pack the dryer; clothes should be able to
tumble freely.

USING YOUR DRYER

3.
Select cycle
Select the desired cycle for your load. See the "Dryer Cycle
Guide" for more information about each cycle.
Casual and Delicates Cycles
You can select a different dryness level, depending on your load,
by turning the knob to the desired dryness level.
Selecting More Dry or Less Dry automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
These automatic dry cycles give the best drying in the shortest
time. Drying time varies based on fabric type, load size, and
dryness setting.
NOTE: More Dry removes more load moisture. Less Dry
removes less moisture and is used for loads you may want
to put on a hanger to complete drying.
4.
Press START button to begin cycle
Push and hold the START button to begin the cycle.
Promptly remove garments after cycle has completed
to reduce wrinkling.
13