Kenmore 81442710 Guide D'utilisation Et D'entretien page 12

Selecting Water Temperatures
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to
save energy. This will be cooler
than your hot water heater
setting.
Warm
Some cold water will be
added, so this will be cooler
than what your previous
washer provided.
Cool Lights
Some warm water may
be added to assist in soil
removal and to help dissolve
detergents.
Cool Darks
A small amount of warm water
may be added to assist in soil
removal and to help dissolve
detergents. Water will be
colder than "Cool" setting.
Cold
This is the temperature from
your faucet.
NOTE: In wash water temperatures colder than 60ºF (15.6ºC),
detergents do not dissolve well. Soils can be difficult to remove.
Some fabrics can retain wear wrinkles and have increased pilling
(the formation of small lint-like balls on the surface of garments).
8.
Select CYCLE SELECT
Press the CYCLE SELECT button to select your wash cycle.
See the "Cycle Guide" for details on cycle features.
12
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Dark colors that bleed or fade
Light soils
Dark colors that bleed or fade
Light soils
9.
Press START/PAUSE to begin wash cycle
Press the START/PAUSE button to start the wash cycle.
When the cycle has finished, the end-of-cycle signal will sound
(if set). Wait 1 minute for the lid to unlock. Promptly remove
items when cycle is done to avoid odor, reduce wrinkling,
and reduce rusting of metal hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add one or two missed items:
Press the START/PAUSE button to pause the washer; the lid will
unlock once the washer movement has stopped. This may take
several minutes if the load was spinning at a high speed. Then
close the lid and press the START/PAUSE button again to restart
the cycle.
To stop or restart your washer:
• To stop the washer at any time, press the START/PAUSE
button and the cycle will pause.
• To restart the washer, press the START/PAUSE button
and the cycle will resume.
NOTE: If the washer is paused while in the spin phase, the lid
will unlock after 1 minute. During that minute, the START/PAUSE
button will be disabled.