Very Important - BaByliss PRO FX765C Mode D'emploi

40mm stainless
steel T-blade
Cleaning brush
Lubricating oil
FX765C IB-17_126.indd 5-6
All manuals and user guides at all-guides.com
Blade
On/Off switch
OPERATING INSTRUCTIONS
This commercial hair clipper is designed for human use only. Use on Alternating
Current 120V AC (60 hertz) only. To reduce the risk of electric shock, this
appliance has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will fit in the outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not attempt to defeat this safety feature or
change the plug in any way.
OILING THE BLADES
About once a month, you should oil the trimmer blades with the oil provided
in your kit. It is best to do this over a piece of newspaper. Turn the trimmer on
and hold it so that the blades are pointed downward. Spread one drop of oil
across the blades, then turn the trimmer off and wipe away the excess oil with
a soft cloth.
Be careful not to use too much oil and don't oil your trimmer more than
necessary, as this could damage the motor. (Never attempt to oil the motor
bearing, as it is permanently lubricated). Keep oil out of reach of children.
Do not pull, twist, or wrap line cord around appliance. Continuous stress
on cord can damage cord insulation and result in shock.
VERY IMPORTANT: Blades must be cleaned and oiled on a
regular basis for proper functioning. Failure to regularly
clean and oil the blades will void the warranty.
3/31/17 2:32 PM