Beyerdynamic AVENTHO WIRELESS Manuel page 17

Aventho wireless – Headphones
Headphones LED display table
Charging
Fully charged
Switching off
Battery almost empty
®
Bluetooth connection mode active
(Pairing)
Bluetooth ® connection active
®
Bluetooth connection lost
Media playback active
Incoming call
Playback device settings for your best wireless sound
To achieve your best possible sound via Bluetooth
wireless, you should consider the following practical hints:
• Set the volume of the Aventho wireless to minimum, of the playback device to
maximum. From then on, adjust the volume on the Aventho wireless only, not on the
playback device. This applies only to playback devices that do not automatically
synchronise the volume.
• On playback devices that automatically synchronise the volume (e.g. iPhone, iPad,
various Android smartphones), the headphones volume is always identical to the
volume of the playback device.
• Deactivate any audio effects that might exist in your player software.
• Ensure that aptX™ HD is switched on at the Aventho wireless, if supported by your
playback device.
red LED flashing
LED permanently lit
LED lights up one time for 1.5 sec.
red LED flashing fast 3 x
red and blue LED flash alternating
blue LED flashes slowly with interrup-
tions of 7 sec.
blue LED flashes slowly with interrup-
tions of 3 sec.
blue LED flashes slowly with interrup-
tions of 7 sec.
blue LED flashes fast with interruptions
of 1 sec.
®
wireless technology with Aventho
17