10
Pairing and clearing the list of players
If there are already several players in the list of your Aventho wireless and your Aventho
wireless cannot be paired with another new player, the list is full and should be cleared
so that the new player can be added.
This is how to clear the list:
• Hold down the button
so that the Aventho wireless will switch into the pairing mode and clear the list of
players simultaneously.
Multi point operation
The Aventho wireless can be paired to up 8 devices with Bluetooth
. Active connections can be established with up to two devices at a time. However,
playback of music and phone operation is only possible with one device at a time. Phone
operation has priority over playback of music; i. e. playback of music is interrupted
during phone calls.
The following priorities apply during the use of playback devices:
Priority
Profile
1
HFP (phone operation)
2
HFP (phone operation)
3
A2DP (playback of music)
4
A2DP (playback of music)
Setting up multi point
• Pair the Aventho wireless with the first device (refer to "pairing with the player").
• Deactivate the Bluetooth
• Switch the Aventho wireless off.
• Press the button
nating blue and red).
• Pair the Aventho wireless with the second device (refer to "pairing with the player").
• Re-activate the bluetooth connection to the first device that automatically connects
to the Aventho wireless.
• Once both devices are paired with the Aventho wireless, the Aventho wireless auto-
matically connects with both devices each time it is powered up.
of the turned off Aventho wireless for more than 10 seconds,
®
connection on the first device.
for 6 seconds to start pairing mode (LED
Aventho wireless – Headphones
Playback device (PD)
PD 1 (device used first)
PD 2 (device used second)
PD 1 (device used first)
PD 2 (device used second)
®
wireless technology
flashes slowly alter-