Beyerdynamic AVENTHO WIRELESS Manuel page 14

14
• Toggle between two callers:
Press the centre of the touch pad
approx. two seconds.
Charging
• For charging the rechargeable battery we recommend using the supplied USB
charging cable only.
• Connect the Aventho wireless with this USB charging cable to any USB compliant
USB port supplying voltage (e.g. USB power supply).
• During charging the LED
• As soon as the LED
completely recharged.
• Detach the USB charging cable after the charging process.
Activating and deactivating aptX™ HD
• Activating aptX™ HD:
Switch on the Aventho wireless.
Then perform the following steps within two seconds:
– Hold button
– Drag one finger upwards on the touch pad
– Release button
• Deactivating aptX™ HD:
Switch on the Aventho wireless.
Then perform the following steps within two seconds:
– Hold button
– Drag one finger downwards on the touch pad
– Release button
Activating and deactivating voice messages
• Activating / deactivating voice messages:
Switch on the Aventho wireless.
Then perform the following steps within two seconds:
– Hold button
– Briefly tap the touch pad
– Release button
is flashing red.
is permanently illuminated red, the rechargeable battery is
.
.
.
.
.
twice with one finger.
.
Aventho wireless – Headphones
for
2 sec
.
.