User Information; Product Description - Bosch BEA 550 Notice Originale

2.

User information

2.1 Important notes
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the BEA 550 and must always be heeded.
2.2 Safety instructions
All the pertinent safety instructions can be found
in the separate manual "Important notes on and
safety instructions for Bosch Test Equipment". These
instructions must be carefully studied prior to start-
up, connection and operation of the BEA 550 and
must always be heeded.
3.

Product Description

3.1 Intended use
The mobile Bosch Emissions Analysis, hereafter
called BEA 550 is designed to facilitate user-friendly
emissions tests of vehicles.
BEA 550 is a location-independent modular system
for the measurement of diesel and gasoline vehicle
emissions. The range of test specimens includes
the entire spectrum of gasoline and diesel road
vehicles on which emission measurements have to
be performed during workshop inspections, both to
comply with legal requirements and for the purposes
of localizing and rectifying faults.
!
If the BEA 550 and the supplied accessories
are operated contrary to the way specified by
the manufacturer in the operating instructions,
the protection provided by the BEA 550 and the
supplied accessories may be compromised.
Robert Bosch GmbH
User information | BEA 550 | 9 |
3.2 Scope of delivery
i
The scope of delivery depends on the product
variant ordered as well as the special accessories
ordered, and can deviate from the following list.
Designation
BEA 060
BEA 070
BEA 030
KTS 515
Order number label BEA 550
Software package with SystemSoft BEA-PC
Operating instructions
3.3 Special accessories
Information on special accessories, such as vehicle-
specific connecting cables, extra measurement leads
and connecting cables, can be obtained from your
authorized Bosch dealer.
3.4 Prerequisites
The BEA 550 can only be operated from a computer
and with the SystemSoft BEA-PC.
3.4.1 Hardware
R
Computer with operating system Windows 8 or
Windows 10
R
DVD drive
R
CPU (processor) 2 GHz or higher
R
Hard drive with at least 5 GB of free storage space
R
4 GB of RAM or more
R
Two vacant USB ports for the Bluetooth USB
adapter and for a USB connecting cable
3.4.2 Software
SystemSoft BEA-PC installed on the computer.
i
For further information see the "BEA-PC" Online
Help.
3.5 Components
!
Use BEA 550 in enclosed workshop areas only.
Protect the BEA 550 against moisture.
The BEA 550 consists of BEA 030, BEA 060, BEA 070
and, depending on version, also KTS 515. Refer to the
operating instructions for notes on these components.
en
Order number
1 687 023 613
1 687 023 638
1 687 023 577
1 687 023 479
–
–
1 689 979 922
1 689 989 178
|
1 689 989 178 2022-07-24