shark SM200 Serie Manuel Du Propriétaire page 7

fig. 1
IMPORTANT: Always make sure the mop
is UNPLUGGED from the wall when not in
use. Never fill the mop, attach the mop head,
or change or remove the Sonic Lift
pad when the mop is plugged into the wall. To
prolong the life of your Shark
Pocket Mop, we recommend using distilled
™
water. Make sure you only add water to the
tank. The addition of chemicals or cleaning
solutions may damage the appliance and could
be unsafe for you and your family.
ASSEMBLY
1
cleaning
™
Sonic Steam
®
2
3
The Sonic Lift cleaning pad has two different
™
cleaning sides. One side has nylon scrubbers to
break up tough stains and the other side is a shaggy
cleaning pad to lift up and lock away dirt and debris.
Insert the mop handle into the main body of the
steam mop (into the tube that leads to the tank).
Push the mop handle and main body of the
steam mop together until you hear it "click" into
place. (Fig. 1)
Snap the mop head into the mop body by lining
up the groove on the back of the mop body with
the groove on the back of the mop head. Push
until you hear it "click" into place. (Fig. 2)
Hold the power cord and wrap it around the cord
holders. (Fig. 3)
www.sharkclean.com
English
fig. 2
fig. 3
3