How To Use; Cleaning - Vornado VMH300 Guide Du Propriétaire

HOW TO USE

Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
1. Use integrated handle on top of
heater for lifting and carrying.
2. Position heater so airflow is
not obstructed.
3. Unwrap power cord from
storage tray on back of heater.
Plug power cord into standard
grounded wall outlet.
10 English

CLEANING

Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning the outside of the heater is recommended
on a bi-weekly basis. If service is required, return your heater to Vornado. See WARRANTY for instructions.
4. Select Mode by turning control 1. Unplug heater before cleaning.
dial. Next, set thermostat to
highest setting by turning
clockwise. When room
reaches desired comfort
level, turn thermostat slowly
counterclockwise until heat 2. Use brush attachment on
cycles off. household vacuum cleaner to
vacuum any accumulated dust
off Front Outlet Grill.
You may also clean the heater
with high-pressured air, as well.
3. Use brush attachment on
household vacuum cleaner to
vacuum any accumulated dust off
Inlet Filter on back of heater.
4. Wipe down entire heater with
soft cloth.
Note: Inlet Filter on back of heater
is not removable.
English
11