Ribimex PRFRONT/B1 Manuel D'instructions Et D'utilisation page 10

4.2- Content
• 1 headlamp
• 1 micro-USB charging cable
• 1 instruction manual
4.3- Assembly
No assembly or adjustment is required by the user.
4.4- Charging the battery
• The built-in battery is a lithium-ion battery that can be charged anytime without affecting
battery life.
• Charge the battery before the first use.
• Connect the provided charging cable to the micro-USB port (5) on the tool.
• Connect the other end of the charging cable to a suitable USB 2,0 power adaptor (5V
1,0A), then plug the adaptor to the wall socket.
• Red indicator light illuminates when charging is in progress.
• Indicator light turns green when charging is completed.
4.5- Switch On/Off
Non-sensor mode
• Press the power button (non-sensor mode) (1) once, the headlamp starts with HIGH
brightness (350 lm).
• Press the power button (non-sensor mode) again, the headlamp changes to LOW brightness
(100 lm).
• Press the power button (non-sensor mode) again, the headlamp switchs to RED light.
• Press the power button (non-sensor mode) again, the headlamp flashes with RED light.
• To switch off the light, press the power button (non-sensor mode) again.
Sensor mode
• In the sensor mode, the light can be turn on or off by waving hands.
• 20 cm sensing distance.
• Press the power button (sensor mode) (3) once, the headlamp starts with HIGH brightness
(350 lm).
• Press the power button (sensor mode) again, the headlamp switchs to RED light.
• To switch off the light, press the power button (sensor mode) again.
4.6- Lighthead angle adjustment
• The lighthead can be manually adjusted within a range (9° - 18° - 27° - 36° - 45°).
V. OPERATION
5.1- Intended use
This headlamp is intended for domestic use only. Do not use for artisanal, commercial,
professional and / or industrial use. It is designed for mobile illumination in a limited space and
for a limited time in indoor and outdoor areas and is not suitable for general room lighting.
Page 10 / 17